High Speed AGV 134.2Khz FDX-B Tag Reader

Low frequency high-speed AGV RFID sensor,

Voltage:9 ~ 30V wide power input, over-voltage protection,

Read distance:>=15 cm,

Ultra-high speed reading card, ,resistance to metal design, can be mounted on the metal surface directly

100% Stable and reliable not leak reading card.Use for a long time not drift.Interface for full protection.

Industrial-grade, completely waterproof and dustproof design,

Full protection against surge in 232 and 485 double output.

Good low penetrability, card read distance is stable and reliable, the scope is clear, is not affected by the liquid, is an ideal solution to industrial robot RFID positioning navigation.

Product size: 80 X 75 X 45 MM

Weight: 180 g

Interface: RS232 and RS485 dual output.

1: the product specifications

2: the pin definition

3: The LED signal

Reader will start the automatic tuning when power on, the blue light is lit up, the led will go out when Tuning completion.

After the success of the reading card, blue lights flashing. At the same time, the data sent by RS232 serial port or RS485.

4: data format

Serial port baud rate, 9600, 8 N1, RS232 level; When the card into card read area, the reader will output card number twice, When send the command  $R#  can be read the card repeatedly, send the command  $S# output card number repeatedly.

Check value calculation: XOR 16Bit HEX from the start of “F” to the end of the card number.

 Example:

Card number:90000260009693

The module output:  $F9000026000969327C#

“$” Is the data first, ”F”means FDX-B tag

900002600096932 is the card number,7C For Check value; # is Data tail.

Check value calculation method:

46^39^30^30^30^30^32^36^30^30^30^39^36^39^33^32 = 0X7C

Note:EMID is 10bit data encoding format(In front of the national code and fill 00),FDX-B is 15bit data encoding format.

EMID Card printing 0002327100,The reader output data $E01700000232710076 #

FDX - B Tag printing 900002600096965 , The reader output data $F9000026000969657E #